New Solution‐Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Several new solution‐processable organic semiconductors based on dendritic oligoquinolines were synthesized and were used as electron‐transport and hole‐blocking materials to realize highly efficient blue phosphorescent organic light‐emitting diodes (PhOLEDs). Various substitutions on the quinoline rings while keeping the central meta‐linked tris(quinolin‐2‐yl)benzene gave electron transport materials that combined wide energy gap (>3.3 eV), moderate electron affinity (2.55‐2.8 eV), and deep HOMO energy level (<‐6.08 eV) with electron mobility as high as 3.3 × 10^?3 cm² V^?1 s^?1. Polymer‐based PhOLEDs with iridium (III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic) blue triplet emitter and solution‐processed oligoquinolines as the electron‐transport layers (ETLs) gave luminous efficiency of 30.5 cd A^?1 at a brightness of 4130 cd m^?2 with an external quantum efficiency (EQE) of 16.0%. Blue PhOLEDs incorporating solution‐deposited ETLs were over two‐fold more efficient than those containing vacuum‐deposited ETLs. Atomic force microscopy imaging shows that the solution‐deposited oligoquinoline ETLs formed vertically oriented nanopillars and rough surfaces that enable good ETL/cathode contacts, eliminating the need for cathode interfacial materials (LiF, CsF). These solution‐processed blue PhOLEDs have the highest performance observed to date in polymer‐based blue PhOLEDs.     

蓝色荧光粉K(Na)BaBP2O8:Eu2+的制备与发光特性

采用高温固相法在还原气氛中合成K(Na)BaBP₂O ₈:Eu²⁺系列硼磷酸盐蓝色荧光粉,研究煅烧温度 以及用Na⁺掺杂替换K⁺对荧光粉晶体结构和发光性能的影响。利用热重-示差扫描量热 (TG-DSC)、X射 线衍射(XRD)、荧光(PL)光谱和色坐标(CIE)等手段确定了 荧光粉的合成温度,并对荧光粉的晶体 结构和发光性能进行表征。结果表明,800～875℃制备的KBaBP₂O ₈:0.03Eu²⁺荧光粉具有KBaBP₂O₈纯相 结构,属于四方晶系,空间群I42d,荧光粉的最佳合 成温度为875℃。K(Na)BaBP₂O₈:Eu²⁺系列荧光粉 可被波长为365nm的近紫外光有效激发,与InGaN芯片( 350~410nm)相匹配;其发射光谱为 400~650nm的不对称宽带,发射峰位于456nm 左右,对应Eu²⁺的4f^65d1-4f⁷-5d⁰跃迁。利用van Uitert经 验公式计算了Eu²⁺取代KBaBP₂O₈中Ba²⁺和K⁺时所占的晶体学格位,得出 449.4nm、439.1nm两个发射属 于Eu²⁺占据8配位的Ba²⁺和K⁺的5d-4f跃迁发射 ,511.0、506.7nm两个发射属于Eu²⁺ 占据6配位的 Ba²⁺和K⁺的5d-4f跃迁发射。用适量Na⁺替换K⁺可 以明显提高荧光粉的发光强度,其最佳掺杂摩尔比例为 Na/K=0.35/0.65,此时荧光粉的主晶相没有改变,但XRD衍射峰向大角度方向偏移。K(Na)Ba BP₂O₈:Eu²⁺ 荧光粉的CIE点可落在从蓝光到蓝白光区域,在近紫外LED应 用中可以根据实际需要灵活选择。     

纳米LiInO2光催化剂的溶胶-凝胶法制备与表征

本文利用溶胶-凝胶法制备了LiInO₂纳米材料,采用X-射线衍射(XRD)、扫描电镜(SEM)和紫外-可见吸收光谱等测试手段,研究了制备条件对LiInO₂微观结构的影响因素,并以亚甲基蓝为目标降解物研究了LiInO₂的光催化性能。研究结果表明：制备的LiInO₂纳米粒子具有LiFeO₂的晶型,颗粒尺寸约50-100纳米,制备样品的焙烧温度对其结构和性能产生了明显地影响,在氙灯(300W)照射90 min条件下,纳米LiInO₂对亚甲基蓝的光催化降解率达92%,活性位点捕获实验表明光生空穴在降解亚甲基蓝的机制中占主导作用。     

Attenuation of methylene blue dye during riverbank filtration through sandy aquifers

Although several studies have focused on the removal of organics and pathogens during riverbank filtration (RBF), no study has been carried out on the attenuation of dyes during RBF. In the present work, removal of methylene blue (MB) through aquifer materials collected from five RBF sites in India has been investigated. Brunauer Emmet Teller (BET) surface areas of the aquifer materials were 1.2–6.5 m²/g. Adsorption followed the pseudo‐second‐order kinetics and Langmuir isotherm, suggesting monolayer adsorption. Column results showed saturation capacity of 0.467–1.234 mg MB/g for different aquifer materials. Retardation factors for MB were found to be very high ranging from 430 to 987, due to its high hydrophobicity (octanol/water partition coefficient = 5.85). Results showed that BET surface area or the roughness played a very important role in the retardation of MB. Results suggest that the breakthrough of MB in a RBF well in sandy aquifers will take several years.     

γ-Al_2O_3催化尿素法合成二苯甲烷二氨基甲酸甲酯反应研究

首次尝试以二苯甲烷二胺(MDA)、尿素和甲醇为原料直接合成二苯甲烷二氨基甲酸甲酯(MDC),分别考察了催化剂种类和反应条件对MDC合成反应的影响。结果表明:经400℃焙烧2h的γ-Al2O3对该反应具有较高的催化活性。适宜反应条件为:反应温度180℃,反应时间6h,反应初压1.2 MPa,n(MDA)∶n(尿素)∶n(甲醇)∶n(γ-Al2O3)=1∶3∶50∶0.1。在此条件下,MDA的转化率为81.7%,MDC的收率和选择性分别为26.3%和32.2%。采用液相色谱-质谱联用技术对MDC合成反应的反应路径进行了分析,认为促进中间产物4-氨基-4′-氨基甲酸甲酯二苯甲烷(MMC)向MDC转化是提高MDC选择性的关键。     

20% External Quantum Efficiency in Solution‐Processed Blue Thermally Activated Delayed Fluorescent Devices

Highly efficient solution‐processed blue thermally activated delayed fluorescent (TADF) devices are developed by designing soluble blue TADF emitters. The solubility and emission color could be managed by introducing F as an electron withdrawing unit instead of CN. Two soluble blue TADF emitters are synthesized and show a high external quantum efficiency of 20.0% with a color coordinate of (0.16,0.26), and it is the best quantum efficiency reported in solution‐processed TADF devices. The device performances of the solution‐processed blue TADF devices are comparable to those of vacuum‐processed blue TADF devices.     

SnO_2/聚氯乙烯复合材料的制备及光催化性能研究

以二氯化亚锡和聚氯乙烯(PVC)为主要原料,通过光化学合成的方法,在低功率紫外灯辐照下制备了复合光催化剂的前驱体,经热处理后得到了含有共轭聚合物结构的SnO2/聚氯乙烯复合光催化剂材料,并用XRD和UV-Vis等对复合材料进行了表征。光催化降解亚甲基蓝的实验表明,复合材料在可见光辐照下能有效地降解亚甲基蓝,复合材料的催化活性明显优于纯SnO2和PVC直接热处理产物。     

负载磷钼杂多酸/La0.7Ca0.3Fe0.25Co0.75O3/聚吡咯的制备及光催化性能研究

采用甘氨酸-硝酸盐燃烧法成功制备了La0.7Ca0.3Fe0.25Co0.75O3钙钛矿型复合氧化物,以(NH4)2S2O8为氧化剂,运用化学氧化法合成La0.7Ca0.3Fe0.25Co0.75O3/聚吡咯薄膜,然后通过静电自组装方法制备了一种新的表面负载修饰型复合光催化剂La0.7Ca0.3Fe0.25Co0.75O3/PPy/PMO12。采用XRD、SEM、FT-IR对催化剂的物化结构进行了表征。光催化性能测试是以亚甲基蓝染料的水溶液为降解目标,结果表明,PMo12的负载修饰改进了La0.7Ca0.3-Fe0.25Co0.75O3/PPy光催化剂的催化活性。     

硅钼蓝分光光度法测定铁矿石中二氧化硅含量测量不确定度评定

应用测量不确定度评定理论,结合日常工作和实验方法,分析硅钼蓝分光光度法测定铁矿石中二氧化硅含量的影响因素,计算和评定测定过程各不确定度分量,最终给出分析结果的测量不确定度.     

钼蓝光度法测定锰硅合金中磷含量的不确定度评定

测量不确定度可用于对钼蓝光度法测定锰硅合金中磷含量的结果进行评估。通过建立数学模型,找出影响钼蓝光度法测定锰硅合金中磷含量的不确定度因素,计算各个不确定度分量,并合成不确定度,最终给出扩展不确定度和置信水平。